I have a diffusion stone attached to a stainless steel rod (it screws on and off) that I received as part of the haul from James who used to be a member of the board. My problem is I think it is the best setup I have seen, but I can't find anyone who makes it. So if you know what I'm talking about and know of someone who makes or sales these, please let me know.
Big Thanks.
Difusion stone with stainless Steel rod
Moderator: Post Moderators
Difusion stone with stainless Steel rod
An intelligent man is sometimes forced to be drunk with his fools. - Hemingway
-
lexuschris
- Posts: 2101
- Joined: Sat Apr 25, 2009 7:08 pm
- Location: Corona del Mar, CA
- Contact:
Re: Difusion stone with stainless Steel rod
I picked up my O2 regulator & SS aeration wand online, but I don't know the brand.. they might be fabricated just for that site or another. I can send you the link if you want it...
--LexusChris
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
-
BrewMasterBrad
- Pro Brewer
- Posts: 3326
- Joined: Thu Feb 09, 2006 12:31 pm
- Location: Skyland Ale Works, Corona, CA
- Contact:
Re: Difusion stone with stainless Steel rod
William's Brewing sells one, but the stone is permanently fixed to the wand.
http://www.williamsbrewing.com/22_AERAT ... 90C106.cfm
http://www.williamsbrewing.com/22_AERAT ... 90C106.cfm
I saw a werewolf drinking a pina colada down at Trader Vic's
Re: Difusion stone with stainless Steel rod
Yes, I want it. Thanks.lexuschris wrote:I picked up my O2 regulator & SS aeration wand online, but I don't know the brand.. they might be fabricated just for that site or another. I can send you the link if you want it...
--LexusChris
An intelligent man is sometimes forced to be drunk with his fools. - Hemingway
-
lexuschris
- Posts: 2101
- Joined: Sat Apr 25, 2009 7:08 pm
- Location: Corona del Mar, CA
- Contact:
Re: Difusion stone with stainless Steel rod
It was the same one from William's that Brad posted.
--LexusChris
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
-
backyard brewer
- Posts: 3774
- Joined: Fri Feb 18, 2005 5:38 pm
- Location: Orange County, CA
- Contact:
Re: Difusion stone with stainless Steel rod
I wish I could find a source for those stones. I weld them into all kinds of fittings for people but I always have them send me the stone.
Become a Brewer's Hardware Fan on Facebook!Re: Difusion stone with stainless Steel rod
Derrin, I may have a direct source for the stones. My mandarin is pretty poor these days, but the guys does English pretty well. Let me see what quantity he wants.backyard brewer wrote:I wish I could find a source for those stones. I weld them into all kinds of fittings for people but I always have them send me the stone.
An intelligent man is sometimes forced to be drunk with his fools. - Hemingway
-
backyard brewer
- Posts: 3774
- Joined: Fri Feb 18, 2005 5:38 pm
- Location: Orange County, CA
- Contact:
Re: Difusion stone with stainless Steel rod
Sounds good to me. I'm doing a BWT today for about 650 total tri clover fittingsoc eric wrote:Derrin, I may have a direct source for the stones. My mandarin is pretty poor these days, but the guys does English pretty well. Let me see what quantity he wants.backyard brewer wrote:I wish I could find a source for those stones. I weld them into all kinds of fittings for people but I always have them send me the stone.