I need to mill some grain!

A place to discuss all things related to brewing ingredients.

Moderator: Post Moderators

Post Reply
User avatar
beerGuardin
Posts: 34
Joined: Fri Sep 19, 2008 6:40 pm
Location: Anaheim

I need to mill some grain!

Post by beerGuardin »

I need a hand here. Does anyone have a grain mill that I can run a few pounds of grain through? Ill gladly trade for some beer for it.

Thanks!
Pat
brianc
Posts: 318
Joined: Fri Sep 02, 2005 2:10 pm
Location: Garden Grove, CA
Contact:

Re: I need to mill some grain!

Post by brianc »

I have one you can run it through. When did you need it?
User avatar
beerGuardin
Posts: 34
Joined: Fri Sep 19, 2008 6:40 pm
Location: Anaheim

Re: I need to mill some grain!

Post by beerGuardin »

pm sent.
User avatar
JonGoku
Posts: 699
Joined: Wed Dec 17, 2008 11:54 pm
Location: Fountain Valley, CA

Re: I need to mill some grain!

Post by JonGoku »

Check with kevin and you might be able to do it at BP if you promise to buy your next grain bill there.
Jon Image
dhempy
Posts: 2357
Joined: Mon May 09, 2005 4:10 pm
Location: Santa Rosa Valley, CA

Re: I need to mill some grain!

Post by dhempy »

Unfortunately I'm in Camarillo but if you're in the area .. you're welcome to use my mill as well.

Dan
User avatar
kevinham
Posts: 623
Joined: Wed Feb 27, 2008 11:37 am
Location: Orange, CA
Contact:

Re: I need to mill some grain!

Post by kevinham »

Feel free to stop by The Bruery Provisions and I will mill it for you. Or bring the grain to the meeting tonight if you are planning on going.
Kevin
User avatar
beerGuardin
Posts: 34
Joined: Fri Sep 19, 2008 6:40 pm
Location: Anaheim

Re: I need to mill some grain!

Post by beerGuardin »

Thanks again Kevin!

By the way, the shop looks good, Cant wait to come by on my next day off to get some "provisions" for another batch.

:cheers:
User avatar
JonGoku
Posts: 699
Joined: Wed Dec 17, 2008 11:54 pm
Location: Fountain Valley, CA

Re: I need to mill some grain!

Post by JonGoku »

BTW if your interested in a mill, you should do some garage saleing or swap meeting today and look for a pasta maker :D

Check this thread out.
Jon Image
User avatar
kevinham
Posts: 623
Joined: Wed Feb 27, 2008 11:37 am
Location: Orange, CA
Contact:

Re: I need to mill some grain!

Post by kevinham »

beerGuardin wrote:Thanks again Kevin!

By the way, the shop looks good, Cant wait to come by on my next day off to get some "provisions" for another batch.

:cheers:
No problem, hope to see you around there again soon.
Kevin
User avatar
pt
Posts: 48
Joined: Thu Mar 20, 2008 10:32 am

Re: I need to mill some grain!

Post by pt »

JonGoku wrote:BTW if your interested in a mill, you should do some garage saleing or swap meeting today and look for a pasta maker :D

Check this thread out.
Badass..thanks for the link...gonna try (sometime in the future).
Post Reply