Club Meeting – July 21, 2015 @ Barley Forge Brewing Co - 7pm

This is an open forum to discuss all things that just might be on your mind.

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby Brau Ritter on Fri Jul 24, 2015 6:56 pm

Hello fellow brewer,

Thanks for the warm welcome and the feedback on the beers I shared on Tuesday. I want to use the opportunitry to introduce myself. I'm a homebrewer since a little over a year and switch to all grain pretty fast. I usually brew 2-3 times a month and so far I tried a lot of different styles. Six month ago I started kegging with pinlock kegs. Really like that a lot.

I'm really looking forward to great discussions with fellow brewers and of course all the great beers I was able to sample.

Thanks,
Hussam
User avatar
Brau Ritter
 
Posts: 20
Joined: Wed Jul 08, 2015 6:24 pm
Location: Irvine, CA

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby Bret America on Sun Jul 26, 2015 2:29 pm

Thank you to everyone for the warm welcome Tuesday at Barley Forge. Impressed with how many attend club meetings and the expertise in the room. Appreciated the feedback on my Summer Farmhouse. I enjoyed the good will and that every person there was willing to strike up a friendly conversation. Some good brews and education were had!

-bret
Bret America
 
Posts: 7
Joined: Sun Jun 07, 2015 9:59 am

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby Craft Conversations on Mon Jul 27, 2015 5:10 pm

Hello everyone! My name is Sagar and Barley Forge was my first club meeting. It was really nice meeting some of you and hopefully soon I'll have the pleasure of meeting everyone else in the club. I really enjoyed the tasting (thanks Chris and the home brewers that shared)! I been brewing for over a year and a half or so and I love the science, artistry, and social aspects of brewing. I like a variety of beer styles and my selection depends mostly on my mood but have a preference towards Belgian styles (Triples, Quads, Flanders Reds, Lambics, etc.), balanced IPAs (good malt-hop balance e.g. Bell's Two Hearted Ale & Ballast Point's Sculpin, leaning less towards the very hoppy west coast IPAs and more for a hop focused balanced ale) and good bourbon barrel aged stouts and porters. I found out about the Brewcommune club through the wonderful staff at Brewers Hardware and currently building a BCS 460 brew stand but need help with my gas line and honeywell valves to my burners. Anyways looking forward to meeting everyone, learning from your wisdom, and thank you for a wonderful time!!! :happybeer:
Craft Conversations
 
Posts: 8
Joined: Mon Jun 01, 2015 10:17 am

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby JonW on Mon Jul 27, 2015 7:21 pm

Another great welcome to the new folks that showed up. It's always great to find new people that share the passion of brewing.

Sagar - there are several of us here with BCS based systems. Don't hesitate to start a thread and ask questions. Also, if you haven't been there yet, check at the ECC/BCS forum at http://forum.embeddedcc.com/ . I'm also on that forum as JonW.
User avatar
JonW
Site Admin
 
Posts: 1023
Joined: Sat Jan 23, 2010 12:21 am
Location: Huntington Beach, CA

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby dhempy on Mon Jul 27, 2015 8:41 pm

Welcome new BCers.

Sagar ... which Honeywell valves are you using? I'm using three of the Smart Vales similar to (if not exactly) this with my 462.

Like Jon said, start a thread and ask away.

Dan
dhempy
 
Posts: 2357
Joined: Mon May 09, 2005 4:10 pm
Location: Santa Rosa Valley, CA

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby Craft Conversations on Wed Jul 29, 2015 11:29 am

Thank you guys for your help! I do not want to detract too much away from this thread so I will create my own and ask away.

I purchased this valve:
http://www.amazon.com/gp/product/B003WZ ... detailpage
Craft Conversations
 
Posts: 8
Joined: Mon Jun 01, 2015 10:17 am

Re: Club Meeting – July 21, 2015 @ Barley Forge Brewing Co -

Postby windsorhomebrewsupplyco on Thu Jul 30, 2015 5:28 pm

If it matters, I brought the kolsch. If it wasn't good...I didn't bring it
windsorhomebrewsupplyco
 
Posts: 12
Joined: Sat Jun 13, 2015 9:37 pm

Previous

Return to Cheers!



Who is online

Users browsing this forum: No registered users and 1 guest

cron